This is design circuit for converter in DC voltage. This circuit can work to convert voltage in 5 – 10 Volt. The circuit is work based on IC MAXIM. This is the figure of the circuit.
The MAX889T voltage inverter, IC1, converts a positive input to a negative output voltage with an absolute magnitude lower than that of its input. But, in this circuit, Schottky diodes D1 and D2 and capacitors C4 and C5 help produce a higher output voltage. The circuits nominal output is VOUT = (2xVIN − 2VD − IOUT−RO), where VIN is the input voltage, VD is a diode’s forward-voltage drop, IOUT is the output current, and RO is IC1’s output resistance in free-running mode.
The MAX889T voltage inverter, IC1, converts a positive input to a negative output voltage with an absolute magnitude lower than that of its input. But, in this circuit, Schottky diodes D1 and D2 and capacitors C4 and C5 help produce a higher output voltage. The circuits nominal output is VOUT = (2xVIN − 2VD − IOUT−RO), where VIN is the input voltage, VD is a diode’s forward-voltage drop, IOUT is the output current, and RO is IC1’s output resistance in free-running mode.
No comments:
Post a Comment