Simple Audio Mixer Using FET

This is a simple project circuit for mixes two or more channels into one channel (eg. stereo into mono). The circuit can mix as many or as few channels as you like and consume very little power. This is the figure of the circuit.


This circuit is based on or built by FET 2N3819. The circuit can be powered by a single 9 volt battery. As many or as few channels as are required can be added to the mixer. A shielded case is probably needed to reduce hum and help stop oscillations.

Part:
R1, R3 10K Pot
R2, R4 100K 1/4 W Resistor
R5 6.8K 1/4 W Resistor
C1, C2, C3 0.1uF Capacitor
Q1 2N3819 Junction FET
MISC Wire, Shielded (Metal) Case, Phone or Other Plug For Output